FIXOBOND PC 70A
|
|
| Base |
Synthetic Rubber |
| Application |
Leather, rubber, canvas, wood, flooring, automobile body decor and similar other. |
| Solvent |
Aromatic and Aliphatic solvent combination. |
| Colour |
Light Tan. |
| Viscosity |
1600 - 1800 cps at 30o ± 2oC. |
Make sure that the surfaces to be bonded are clean, dry and properly degreased. Smooth surfaces are to be buffed or etched with sand paper and the loose particles removed. Apply an effective even coat of adhesive on both the cleaned surfaces to be bonded, and allow the solvent to evaporate in next 10 - 15 minutes. For better result, double coat is recommended on porous substrates. Place the coated surfaces one over the other beginning from one end. Press firmly for a proper overall contact. Leave at least for 24 hours to achieve final bond strength.
Highly inflammable. Replace lid immediately after partial use. Store in a cool and dry place.
25 Ltr, 5 Ltr, 1 Ltr.
Shake the container before use.
|
