Application wise:
Call us on
91 - 98746 20044
Product Range
- Synthetic Rubber Based Adhesive
- SUPER JOINER
- DENDRITE URGENTA
- DENDRITE DSM 94
- DENDRITE EXP
- DENDRITE FF 555
- DENDRITE FW
- DENDRITE FW M
- DENDRITE PC 65
- DENDRITE PC EXPORT
- DENDRITE PREMIUM 2006
- DENDRITE SP 99 HT
- DENDRITE SP 202
- DENDRITE SR 1010
- DENDRITE SUPREME
- FIXOBOND PC 80A
- DENDRITE PC 99 MS
- DENDRITE PC 69
- DENDRITE SUNKIT
- DENDRITE CLR 88 M
- FIXOBOND PC 70A
- FIXOBOND PC 80A FW
- DENDRITE SPECIAL SPRAYABLE GENERAL
- Polyurethane Based Adhesive
- DENDRITE AT 104
- DENDRITE IM 2010
- DENDRITE OR 1000
- DENDRITE OR 1000 FW
- DENDRITE OR 1005
- DENDRITE OR 3000
- DENDRITE OR 5000
- DENDRITE OR 5000 M
- DENDRITE OR 6500
- DENDRITE OR 7500
- DENDRITE OR 8100
- GENERAL PU 201
- SONA PU 100
- DENDRITE OR 1009
- DENDRITE OR 3000 M
- Formulated-Polyisocyanate as Hardener
- Primer For Footwear
- DENDRITE PHYLON PRIMER
- DENDRITE PUPVC PRIMER
- DENDRITE TPR PRIMER
- OP LEATHER PRIMER
- DENDRITE SC 69
- DENDRITE PRIMER 500
- DENDRITE M 888
- DENDRITE EVA PP PRIMER
- Two Component Epoxy Resin Based Adhesive
- Cyanoacrylate as Instant Adhesive
- Polyurathane Alkyd
- Solvent Cement
- PVA Based Adhesive
Dendrite PC 99 MS
SR ADHESIVE
Specifications
Base
Synthetic Rubber
Application
This is used in footwear industry mostly for making the chappal & sandle. It is specially designed for bonding substrates, like rubber micro sole, neolite sole & synthetic upper like satin, putina etc. It can be used in upholstery, for making chair fittings, sofa fittings and foam-to-foam bonding. This adhesive is operated with in tack time 10min to 50min.
Solvent
It is primarily composed of aliphatic and aromatic solvent Combination
Colour
This is light tan viscous liquid.
Viscosity
1100 - 1300 cps at 30 ± 2ºC.
Method of Application
Make sure that the surfaces to be bonded are even, clean, dry and free from grease/oil. A coat of adhesive is to be applied uniformly on both the surfaces to be joined. Porous substrates like leather may require tow coats for superiors bonding. Wait for 8 – 10 minutes to allow the solvent to evaporate. Place the coated surfaces one above the other while the adhesive remains sticky. Press the surfaces firmly together. Final strength is to be achieved after 24 hrs.
Caution
It is highly inflammable. Replace lid immediately after partial use. Store in a cool and dry place.
Pack Sizes
25Lit. , 5Lit., 1Lit., 500ml.,200ml.,
-
Upper To Sole Bonding
-
Sandal Manufacturing
-
Foam To Foam Bonding
