Call us on
91 - 98746 20044
Make sure that the surfaces to be bonded are even, clean, dry and free from grease/oil. A thin coat of adhesive is to be applied uniformly on both the surfaces to be joined. Porous substrates may require two coats for superior bonding. Allow 1 – 2 minutes for solvent evaporation. Place the coated surfaces, one above the other while the adhesive remains sticky. Press the surfaces firmly together under adequate pressure. Tack retention time of this adhesive is very low approx 2 – 4 min. Final strength is to be achieved after 24 hrs.
It is highly inflammable. Replace lid immediately after partial use. Container should be stored in a cool and dry place. It is suggested to wear suitable protective clothing and safety goggles for protecting eyes while handling.
25Lit.